NC Renewables Portfolio Standard

Clean Energy and Energy Efficiency Portfolio Standard

AI summary · 7/12/2026

North Carolina's Clean Energy and Energy Efficiency Portfolio Standard (CEPS) requires utilities to source 12.5% of electricity from clean energy or efficiency by 2021, which supports expanded clean energy development and may influence your utility's offerings and rates. While this is a utility-level mandate rather than a direct incentive to homeowners, it drives investment in renewable energy infrastructure and efficiency programs that may create opportunities for residential solar, heat pump, or other efficiency improvements through your utility company.

CEPS creates a market for renewable energy credits (RECs)—one REC equals 1 MWh of renewable generation or equivalent thermal energy—that utilities must purchase to meet compliance targets, meaning contractors installing solar photovoltaic, solar thermal, wind, geothermal, or biomass systems generate RECs that utilities need. Facilities must be registered with the North Carolina Utilities Commission and placed into service on or after January 1, 2007, to qualify; utilities track and retire RECs through the NC Renewable Energy Tracking System (NC-RETS), and credit multipliers apply to qualifying biomass (triple credit for the first 20 MW at cleanfields demonstration parks) and swine waste resources in Tier 1 counties (two to three times multiplier for the first six to eight years).

The North Carolina Utilities Commission administers CEPS, requiring investor-owned utilities to meet 12.5% renewable/efficiency by 2021 and municipal/cooperative utilities to reach 10% by 2018, with specific carve-outs (0.20% solar, swine waste, and 900,000 MWh poultry waste by 2026). Utilities file annual compliance plans and reports, procure RECs that must be purchased within three years of generation and retired within seven years, and may use up to 25% out-of-state RECs; cost recovery is capped per customer account ($27–$1,000 depending on sector and period), and the NCUC may modify the schedule if deemed in the public interest, with enforcement authority under N.C. General Statutes Chapter 62.

Program details

Program ID
2660
Last updated
11/24/2025

Eligibility

Sectors
investor-owned utility municipal utilities cooperative utilities
Technologies
solar water heat solar space heat geothermal electric solar thermal electric solar thermal process heat solar photovoltaics wind (all) biomass hydrogen combined heat & power landfill gas tidal wave wind (small) hydroelectric (small) anaerobic digestion yes; specific technologies not identified

Program summary

North Carolina's Clean Energy and Energy Efficiency Portfolio Standard (CEPS), originally established as a Renewable Energy and Energy Efficiency Portfolio Standard (REPS) by Senate Bill 3 in August 2007, requires all investor-owned utilities in the state to supply 12.5% of 2020 retail electricity sales (in North Carolina) from eligible energy resources by 2021. Municipal utilities and electric cooperatives must meet a target of 10% renewables by 2018 and are subject to slightly different rules. In February 2008, the North Carolina Utilities Commission (NCUC) issued an order adopting final rules to implement the CEPS.

Eligible Technologies

Eligible energy resources include solar-electric, solar thermal, wind, hydropower up to 10 megawatts (MW), ocean current or wave energy, biomass that uses Best Available Control Technology (BACT) for air emissions, landfill gas, combined heat and power (CHP) using waste heat from renewables, hydrogen derived from renewables, and electricity demand reduction*.

With the passage of S.B. 678 in 2023, eligible technologies also include facilities placed into service on or after January 1, 2007, which are either (i) a nuclear energy facility, including an uprate to a nuclear energy facility, or (ii) a fusion energy facility.

Up to 25% of the requirement may be met through energy efficiency technologies, including CHP systems powered by non-renewable fuels. After 2021, up to 40% of the standard may be met through energy efficiency.

Requirements

The overall target for renewable energy includes technology-specific targets of 0.2% solar by 2018 (which includes solar electric, solar water heating, solar absorption cooling, solar dehumidification, solar thermally driven refrigeration, and solar industrial process heat), 0.2% energy recovery from swine waste by 2019, and 900,000 megawatt-hours (MWh) of electricity derived from poultry waste by 2014. While the general renewable energy targets and solar set-asides apply individually to each utility, the targets for swine waste and poultry waste were written into the law to apply to the state as a whole, without assigning individual requirements for each utility. Given the difficulty of assessing a utility's compliance with a shared statewide requirement, the NCUC adopted a method for dividing the requirements among the utilities. Through this approach, each utility will be separately responsible for a portion of the swine and poultry waste requirements in proportion to the ratio of their previous year's electricity shares divided by the previous year's total statewide electricity sales. The March 2010 NCUC order also allows the utilities to jointly purchase energy derived from swine and poultry waste.

The NCUC has required that each electric power supplier submit its first annual CEPS compliance plan by September 1, 2008. Beginning in 2009, each power supplier is required to file a compliance report, detailing the actions it has taken to fulfill the requirements of the CEPS. In 2018, NCUC Order adopt various administrative, technical, and conforming amendments to the Commission’s rules, including changes in filling forms and accompanied filling fees.

The compliance schedule for investor-owned utilities appears below. Note that each year's percentage requirement refers to the previous year's electricity sales (i.e., the 2021 standard is 12.5% of 2020 retail sales). The requirements for swine waste and poultry waste were amended by a NCUC Order in November 2012 by delaying requirements that had been previously established for 2012. Another NCUC Order in March 2014 and another NCUC Order in November 2014 further delayed the swine and poultry waste provisions. The requirements for swine and/or poultry waste were delayed again by NCUC orders filed in December 2015, December 2019, December 2020, March 2022, December 2022, December 2023, and November 2024. The schedule presented below accounts for the changes approved by the NCUC.

  • 2010: 0.02% from solar
  • 2012: 3% (including 0.07% from solar)
  • 2013: 3% (including 0.07% from solar)
  • 2014: 3% (including 0.07% from solar + 170,000 MWh from poultry waste)
  • 2015: 6% (including 0.14% from solar)
  • 2016: 6% (including 0.14% from solar)
  • 2017: 6% (including 0.14% from solar)
  • 2018: 10% (including 0.20% from solar)
  • 2019: 10% (including 0.20% from solar + 0.04% from swine waste + 500,000 MWh from poultry waste)
  • 2020: 10% (including 0.20% from solar + 0.07% from swine waste + 700,000 MWh from poultry waste)
  • 2021: 12.5% (including 0.20% from solar + 0.07% from swine waste + 900,000 MWh from poultry waste)
  • 2022: 12.5% (including 0.20% from solar + 0.07% from swine waste + 700,000 MWh from poultry waste)
  • 2023: 12.5% (including 0.20% from solar + 0.05% from swine waste + 900,000 MWh from poultry waste)
  • 2024: 12.5% (including 0.20% from solar + 0.05% from swine waste + 900,000 MWh from poultry waste)
  • 2025: 12.5% (including 0.20% from solar + 0.14% from swine waste + 900,000 MWh from poultry waste)
  • 2026 and thereafter: 12.5% (including 0.20% from solar + 0.20% from swine waste + 900,000 MWh from poultry waste)

Cooperatives and Municipal Utilities

Electric cooperatives and municipal utilities must meet the solar, swine waste and poultry waste goals, but these utilities only must meet an overall target of 10% by 2018. The NCUC amended and delayed the carveouts for swine waste and poultry waste several times, most recently by an order filed in November 2024. Cooperatives and municipal utilities still have to meet the same solar and poultry waste carveouts established for the IOUs, however, they have until 2029 to reach the 0.20% carveout for swine waste. Cooperatives and municipal utilities are permitted to use demand side management or energy efficiency to satisfy the standard without limitation, and may also use large hydropower to meet up to 30% of the renewable energy requirement.

Compliance

Utilities may demonstrate compliance by procuring renewable energy credits (RECs) earned after January 1, 2008. Under NCUC rules, a REC is equivalent to 1 MWh of electricity derived from a renewable energy source, or an equivalent amount of thermal energy in the case of CHP and solar water heating, or 1 MWh of electricity avoided through an efficiency measure. The law explicitly states that RECs do not include credit for emissions reductions from oxides of sulfur and nitrogen, mercury or carbon dioxide. RECs must be purchased within three years of their generation, and must be retired within seven years from when their cost was recovered. Utilities may use unbundled RECs from out-of-state renewable energy facilities to meet up to 25% of the portfolio standard. Qualifying out-of-state facilities are (1) hydroelectric power facilities with a generation capacity up to 10 MW, or (2) renewable energy facilities placed into service on or after January 1, 2007. Suppliers with fewer than 150,000 customers are not limited in the amount of out-of-state renewable energy RECs they may procure to meet the standard. As required by SB 90 of 2009, the NCUC adopted the North Carolina Renewable Energy Tracking System (NC-RETS) in July of 2010 to ensure proper counting of RECs.

For the purposes of REC compliance, the Commission will assign triple credit for every one REC generated by the first 20 MW of a biomass facility located at a "cleanfields renewable energy demonstration park", as defined by SB 886. The credit multipliers will first be applied to the carve-out for poultry waste. Only after the poultry waste carve-out has been completely met can the credit multipliers be applied to the general market CEPS requirements. S.B. 382, enacted in December 2024, established a REC multiplier to swine waste resources located in a Tier 1 county. For the first eight years following the effective date of the bill for currently operating facilities, or from the commercial operation date for newly constructed facilities, the facility will receive two additional "enhanced" RECs for every REC it produces. For the succeeding six years, the facility will receive one additional "enhanced REC for every REC it produces. No facility can receive more than 80,000 enhanced RECs in any one year but may continue to generate RECs without the enhanced credit.

Cost Mitigation Measures

Utilities may recover the incremental cost of renewable resources and up to $1 million in alternative energy research expenditures annually from customers. The cost per customer account is capped according to the following schedule:

Sector 2008 -2011 2012 - 2014 Thereafter
Residential $10 $12 $27
Commercial $50 $150 $150
Industrial $500 $1000 $1000

Special Provisions

Due to the combined circumstances that it 1) has fairly stringent per-account cost caps, 2) allows for energy efficiency and conservation measures to comprise 25% of General Requirement compliance through 2021 and 40% thereafter, North Carolina's CEPS can function in ways similar to an Energy Efficiency Resource Standard (EERS). However, since it does not require specific annual targets for efficiency and demand-side management, it is not formally considered by DSIRE to be an EERS.

The NCUC is responsible for administering the CEPS and may adjust or modify the CEPS schedule if the commission deems such modifications to be in the public interest. Under the NCUC's final rules, there are no specified penalties or alternative payments for noncompliance, but the commission has existing authority under Chapter 62 of the N.C. General Statutes to enforce compliance.

* Senate Bill 75 of 2011 allows for electricity demand reduction to count towards the standard. Unlike "energy efficiency measures", which are only allowed to account for 25% of a utility's requirement, electricity demand reduction is capable of meeting up to 100% of a utility's renewable energy requirement under the law. Senate Bill 75 defines electricity demand reduction as "a measurable reduction in the electricity demand of a retail electric customer that is voluntary, under the real-time control of both the electric power supplier and the retail electric customer, and measured in real time, using two-way communications devices that communicate on the basis of standards."

Contact & resources

Please verify current program details with the administering agency before making any financial decisions.

Keep looking

More programs in NC

Rebates, tax credits and loans often stack. Check what else applies before you buy.

Browse NC programs