NC Net Metering
AI summary · 10/25/2026

If you own or lease a solar, wind, hydro or other eligible renewable system, net metering lets you offset your electricity use with what you generate, with production and use netted monthly. For Duke Energy residential systems connected on or after October 1, 2023, you generally need a time-of-use rate (or the Transitional Bridge Rate, which does not require one), and leftover monthly generation is credited at an avoided-cost-based rate. Expect a monthly minimum bill ($28 Duke Energy Progress, $22 Duke Energy Carolinas) and per-kW demand-side management charges, plus a Grid Access Fee if your solar system is over 15 kW-DC; contact your Duke utility to apply.

Customers with eligible renewable systems, including systems with battery storage, can net meter, which improves project economics by offsetting their consumption. For Duke Energy systems interconnected on or after October 1, 2023, residential customers must be on a time-of-use tariff or the Transitional Bridge Rate, and all customers pay non-bypassable demand-side management charges and a monthly minimum bill ($28 Progress, $22 Carolinas). Residential solar over 15 kW-DC also pays a Grid Access Fee ($1.50/kW Progress, $2.05/kW Carolinas), which the Bridge Rate waives; using batteries to game a TOU tariff is prohibited.

North Carolina net metering is overseen by the NC Utilities Commission and covers solar, wind, hydro, ocean/wave, biomass, qualifying CHP and hydrogen systems across residential, commercial, industrial, government, nonprofit, school and agricultural sectors. Under the March 2023 order, Duke Energy residential systems interconnected on or after October 1, 2023 are netted monthly within time-of-use periods, with excess credited at an avoided-cost-based Net Excess Energy Credit; the Transitional Bridge Rate exempts customers from the Grid Access Fee but not from non-bypassable charges or the minimum bill. Earlier systems follow traditional rules with a 1 MW individual system limit and no aggregate cap, with no standby charges for residential systems up to 20 kW and non-residential up to 100 kW, and utilities must file annual reports with the NCUC.

Program details

Program ID
1246
Last updated
2/27/2026

Eligibility

Sectors
commercial industrial local government nonprofit residential schools state government federal government tribal government agricultural institutional
Technologies
solar photovoltaics wind (all) biomass hydroelectric hydrogen landfill gas tidal wave wind (small) hydroelectric (small) anaerobic digestion fuel cells using renewable fuels lithium-ion

Program summary

Note: The NC Utilities Commission issued an order modifying Duke Energy's net metering rules for residential systems in March 2023. The summary below begins with a description of the new rules and the Proposed Bridge Rate, followed by a description of the historical net metering rules.

New Net Metering Rules and Transitional Bridge Rate (Systems Interconnected on or After October 1, 2023)

Eligibility and Availability

The revised net metering rules apply to all customers who own or lease systems that generate electricity using solar energy, wind energy, hydropower, ocean or wave energy, biomass resources, combined heat and power (CHP) which uses waste heat derived from eligible renewable resources, or hydrogen derived from eligible renewable resources.* The new net metering rules require a customer to be on a time-of-use tariff, however the Proposed Bridge Rate does not require a time-of-use tariff.

Net Excess Generation

Production and consumption are netted on a monthly basis. For customers on a time-of-use tariff, netting will occur separately within each time period. Any excess generation remaining within any time period at the end of the month will be credited at the Net Excess Energy Credit, which is based the avoided cost rate.

Other Provisions

Residential customers with a solar system with a capacity greater than 15 kW-DC must pay a monthly Grid Access Fee of $1.50 per kW per month for Duke Energy Progress and $2.05 per kW per month for Duke Energy Carolinas. Customers with system of any size must also pay non-bypassable charges associated with cost recovery for Duke's demand-side management programs. The non-bypassable charges are $0.44 per kW per month for Duke Energy Progress and $0.36 per kW per month for Duke Energy Carolinas. Net metering customers are also subject to a monthly minimum bill of $28 for Duke Energy Progress and $22 for Duke Energy Carolinas. Customers taking service under the Transitional Bridge Rate do not have to pay the Grid Access Fee, but they do have to pay the non-bypassable charges and minimum bill.

Traditional Net Metering (Systems Interconnected Prior to October 1, 2023)

Eligibility and Availability

Net metering is available to all customers who own or lease systems that generate electricity using solar energy, wind energy, hydropower, ocean or wave energy, biomass resources, combined heat and power (CHP) which uses waste heat derived from eligible renewable resources, or hydrogen derived from eligible renewable resources.* Customers may net meter under any available rate schedule. However, customers that choose to take service under any tariff other than a time-of-use demand (TOUD) tariff must surrender to the utility all renewable energy credits (RECs) associated with the customer’s generation – with no compensation for the customer.

The individual system capacity limit is one megawatt (MW). There is no aggregate capacity limit on net-metered systems. For residential systems up to 20 kilowatts (kW) and non-residential systems up to 100 kW in capacity, utilities may not charge any standby charges or any additional metering charges other than those charged to customers who do not net meter under the applicable rate schedule. For larger systems, utilities are allowed to impose standby charges consistent with approved standby rates applicable to other customer-owned generation.

Net Excess Generation

In general, any customer net excess generation (NEG) during a billing period is carried forward to the following billing period at the utility’s full retail rate, and then surrendered to the utility – with no compensation for the customer – at the beginning of each summer billing season. However, the treatment of generation and NEG for customers on TOU-demand tariffs is more complicated. For these customers, on-peak generation is used to offset on-peak consumption, and off-peak generation is used to offset off-peak consumption. Any remaining on-peak generation is then used to offset off-peak consumption. Off-peak generation may only be used to offset off-peak consumption.

Utilities must file with the NCUC annual reports indicating the number of net-metering applicants and customer-generators, the aggregate capacity of net-metered generation, the size and types of renewable-energy systems, the amounts of on-peak and off-peak generation credited and ultimately granted to the utility, and the reasons for any rejections or removals of customer-generators from a net-metering arrangement.

* In July 2006, the NCUC extended net metering to eligible systems with battery storage. "Gaming” a net-metering arrangement by using battery storage to manipulate a TOU tariff is not allowed.

Contact & resources

Please verify current program details with the administering agency before making any financial decisions.

Keep looking

More programs in NC

Rebates, tax credits and loans often stack. Check what else applies before you buy.

Browse NC programs