City of Eugene - Solar Standards
Eugene's Solar Standards help keep your home's access to sunlight by shaping how nearby lots and buildings are laid out in R-1 and R-2 zones. If you build on an R-1 or R-2 lot of 4,000 square feet or more with a north-south dimension of at least 75 feet, your building must be set back from the northern property line under the city code. Your permit application must include a city-approved form showing the solar setback or the exemption you qualify for.
These standards protect solar access for single-unit and duplex homes, which helps preserve the sun exposure that makes solar projects workable for your customers. For buildings on R-1 or R-2 lots of at least 4,000 square feet with a minimum 75-foot north-south dimension, the development permit application must include a city-approved verification form showing the northern setback or a qualifying exemption. Buildings attached at a common lot line are treated as one building on one combined lot, and subdivisions in these zones must design at least 70% of lots as solar lots unless an exemption applies.
This is a land-use policy in Eugene City Code sections 9.2780 through 9.2795 that preserves solar energy access for single-unit and duplex dwellings in R-1 and R-2 zones through two mechanisms. Solar lot standards require at least 70% of lots in a subdivision to be designed as solar lots, with exemptions for density, site constraints, topography, shade, and housing mix, while solar setback standards require northern property line setbacks for structures on qualifying lots of 4,000 square feet or more with a 75-foot minimum north-south dimension. Compliance is enforced through permit review using a city manager-approved verification form, and it is a regulatory requirement rather than a funded incentive, targeting residential development.
Program details
- Program ID
- 295
- Last updated
- 1/28/2026
Eligibility
- Sectors
- residential
- Technologies
- solar - passive solar water heat solar space heat solar thermal electric solar photovoltaics
Program summary
Solar Standards
The purpose of Eugene's Solar Standards, as described in sections 9.2780 through 9.2795 of the City of Eugene's City Code, is to create lot divisions, layouts and building configurations to help preserve the availability of solar energy to single-unit and duplex dwellings.
Solar Lot Standards
Solar lot standards apply to the creation of lots within subdivisions in R-1 and R-2 zones. In these zones, at least 70% of the lots in a subdivision must be designed as "solar lots" and need to meet certain standards. There are exemptions granted to the solar lot standards for a variety of reasons, including, but not limited to density, site constraints, topography, shade, and housing mix.
Solar Setback Standards
Solar setback standards apply to all structures on R-1 and R-2 zoned lots that are 4,000 square feet or greater, with a minimum north-south dimension of 75 feet. Buildings are required to be setback from the northern property line in accordance with the section of the code that addresses this issue. An applicant for a development permit for a building subject to these standards must submit verification on a form approved by the city manager that shows either the solar setback or how the structure qualifies for an exemption. If buildings on separate lots are attached or connected at a common lot line, the solar setback standards apply as if the buildings are a single building on a single lot composed of both lots.
Contact & resources
- Contact email
- steve.still@eweb.org
Please verify current program details with the administering agency before making any financial decisions.